Operation Specification And Maintenance Method Of Automatic Capsule Filling Machine
Regarding the fully automatic capsule filling machine, what operating specifications and maintenance methods we usually need to pay attention to, the following editor will take you to learn more.
1. When the automatic capsule filling machine works for a long time, the parts and components that are in direct contact with the powder should be cleaned regularly. When the drug type is to be changed or the machine is out of use for a long time, it should be cleaned.
2. The transmission parts of the lower part of the automatic capsule filling machine should be cleaned frequently to make the observation of the operation more clear.
3. The filter of the vacuum system should be opened regularly to remove the clogged dirt.
4. Lubrication of the automatic capsule filling machine.
5. The working surface of the cam roller shall be coated with grease every week.
6. The joint bearing of the next connecting rod of the automatic capsule filling machine must be lubricated with dripping oil every month;
7. Various bearings should be cleaned regularly or according to operating conditions, and grease should be added. Sealed bearings can be lubricated by dripping oil;
8. The transmission chain should be checked for tightness once a week and coated with lubricating oil or grease;
9. The oil quantity of the main drive reducer and the feed reducer shall be checked once a month, and the oil shall be added in time when insufficient, and the lubricating oil shall be replaced every six months;
10. Clean every shift so that the automatic capsule filling machine is dry and normal